Developed for

Adjustments

Technical features

Single stage - 4 Levers - 5 bearings
Body in anodized ERGAL 7075
TOP Sear is hardened 55 HRC coating
EZO High-precision stainless ball bearings made in Japan.
Adjustable between 0.9 and 2.1 oz (25-60 grams)
Installed weight 0.78oz (22 grams)
trigger has a completely enclosed external case
- top sear only exposed where it engages the firing pin
- no lateral holes
- remains debris, dust and dirt free

Sidhe BR evo

$540.00

Quantity

Sidhe triggers are manufactured in Italy since 2010 by Luca Giacomini, an expert engineer and dedicated shooter. The friction in all key pivot points is mitigated by they use of high-precistion stainless ball-bearings.

Sidhe is a Gaelic term for spirit or fairy.

pronunciation for Sidhe
ATTENTION WARNING!
Always check that the weapon is unloaded!
Always make sure it is pointed in a safe direction!
The trigger must be installed by qualified personnel.
If the trigger is not installed and calibrated correctly to the specific firearm it can be dangerous .
Make sure the installer follows the step by step the procedure provided.
Make sure the trigger is clean and dry, do not grease or spray lubricants
Do not set the release weight too low, this can be dangerous and cause unintentional release
The functionality of the trigger should be checked every time you use it .

MANUFACTURER INFO